Maintenance items for ice cream maker

1. During the use of the ice cream maker, the 4 screws on the side of the hydraulic valve should be unscrewed, and the components of the hydraulic valve should be removed. In this process, it is necessary to determine whether its voltage is the rated voltage, if the working voltage is between the rated voltage If the deviation exceeds the allowable range value, then it needs to be checked. Check the valve stem and sealing ring by drawing out the hydraulic valve.

2. In the process of machine transportation, under normal circumstances, the inclination angle of the ice cream maker cannot exceed 45 degrees.

3. When the ice cream maker is in use, its gear setting should not be too high. If the gear setting is too high, it will greatly increase its power consumption, and it will be very detrimental to the service life of the machine.